summaryrefslogtreecommitdiff
path: root/cpukit/doxygen/appl-config.h
diff options
context:
space:
mode:
Diffstat (limited to 'cpukit/doxygen/appl-config.h')
-rw-r--r--cpukit/doxygen/appl-config.h620
1 files changed, 588 insertions, 32 deletions
diff --git a/cpukit/doxygen/appl-config.h b/cpukit/doxygen/appl-config.h
index ccc9032300..cf32a9895d 100644
--- a/cpukit/doxygen/appl-config.h
+++ b/cpukit/doxygen/appl-config.h
@@ -86,6 +86,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* Each option of the Block Device Cache (bdbuf) configuration can be
* explicitly set by the user with the configuration options below. The Block
@@ -110,6 +115,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -136,6 +145,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -162,6 +175,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -188,6 +205,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -219,6 +240,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -241,9 +266,17 @@
* The default value is 15.
*
* @par Constraints
- * The value of the configuration option shall be a valid Classic API task
- * priority. The set of valid task priorities depends on the scheduler
- * configuration.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be a valid Classic API task
+ * priority. The set of valid task priorities depends on the scheduler
+ * configuration.
+ * @endparblock
*/
#define CONFIGURE_BDBUF_READ_AHEAD_TASK_PRIORITY
@@ -264,6 +297,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* @ref CONFIGURE_MINIMUM_TASK_STACK_SIZE.
*
@@ -296,6 +333,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -322,6 +363,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -344,9 +389,17 @@
* The default value is 15.
*
* @par Constraints
- * The value of the configuration option shall be a valid Classic API task
- * priority. The set of valid task priorities depends on the scheduler
- * configuration.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be a valid Classic API task
+ * priority. The set of valid task priorities depends on the scheduler
+ * configuration.
+ * @endparblock
*/
#define CONFIGURE_SWAPOUT_TASK_PRIORITY
@@ -367,6 +420,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -390,9 +447,17 @@
* The default value is 15.
*
* @par Constraints
- * The value of the configuration option shall be a valid Classic API task
- * priority. The set of valid task priorities depends on the scheduler
- * configuration.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be a valid Classic API task
+ * priority. The set of valid task priorities depends on the scheduler
+ * configuration.
+ * @endparblock
*/
#define CONFIGURE_SWAPOUT_WORKER_TASK_PRIORITY
@@ -588,6 +653,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -628,6 +697,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -1078,6 +1151,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* @ref CONFIGURE_MINIMUM_TASK_STACK_SIZE.
*
@@ -1198,8 +1275,16 @@
* The default value is the empty list.
*
* @par Constraints
- * The value of the configuration option shall be a list of initializers for
- * structures of type ::rtems_driver_address_table.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be a list of initializers for
+ * structures of type ::rtems_driver_address_table.
+ * @endparblock
*
* @par Notes
* @parblock
@@ -1226,6 +1311,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* Most BSPs do not include support for an ATA Driver.
@@ -1283,6 +1373,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* The Console Driver is responsible for providing the ``/dev/console`` device
@@ -1319,6 +1414,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* Most BSPs do not include support for a Frame Buffer Driver. This is because
@@ -1344,6 +1444,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* Most BSPs do not include support for an IDE Driver.
@@ -1368,6 +1473,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* This device driver is supported by all BSPs.
*/
@@ -1387,6 +1497,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* Most BSPs do not include support for a real-time clock (RTC). This is
@@ -1412,6 +1527,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This device driver is responsible for providing the ``/dev/console`` device
@@ -1452,6 +1572,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This device driver is responsible for providing the ``/dev/console`` device
@@ -1501,6 +1626,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* This device driver simply provides entry points that return successful and
* is primarily a test fixture. It is supported by all BSPs.
@@ -1521,6 +1651,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* The Benchmark Timer Driver is intended for the benchmark tests of the RTEMS
@@ -1554,6 +1689,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* Most BSPs do not include support for a watchdog device driver. This is
@@ -1579,6 +1719,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* This device driver is supported by all BSPs.
*/
@@ -1598,8 +1743,16 @@
* The default value is the empty list.
*
* @par Constraints
- * The value of the configuration option shall be a list of initializers for
- * structures of type ::rtems_driver_address_table.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be a list of initializers for
+ * structures of type ::rtems_driver_address_table.
+ * @endparblock
*
* @par Notes
* @parblock
@@ -1626,9 +1779,17 @@
* The default value is 140.
*
* @par Constraints
- * The value of the configuration option shall be a valid Classic API task
- * priority. The set of valid task priorities depends on the scheduler
- * configuration.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be a valid Classic API task
+ * priority. The set of valid task priorities depends on the scheduler
+ * configuration.
+ * @endparblock
*
* @par Notes
* This configuration option is only evaluated if the configuration option @ref
@@ -1650,6 +1811,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This device driver is responsible for setting up a mapping from machine
@@ -1717,6 +1883,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be less than or equal to <a
* href="https://en.cppreference.com/w/c/types/limits">SIZE_MAX</a>.
*
@@ -1769,6 +1939,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* The record extensions capture thread create, start, restart, delete, switch,
* begin, exitted and terminate events.
@@ -1799,6 +1974,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* This extension can be used to produce crash dumps.
*/
@@ -1826,6 +2006,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* The zlib compression needs about 512KiB of RAM. This extension can be used
* to produce crash dumps.
@@ -1851,6 +2036,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* The interrupt event recording generates interrupt entry and exit events when
* interrupt entries are dispatched.
@@ -1874,6 +2064,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* 16.
*
@@ -1942,6 +2136,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the described feature is not
* enabled.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_POSIX_TIMERS_FACE_BEHAVIOR
@@ -2014,6 +2213,11 @@
* If this configuration option is undefined, then a base filesystem and the
* configured filesystems are initialized during system initialization.
*
+ * @par Constraints
+ * The configuration option is mandatory for the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall define the configuration option.
+ *
* @par Notes
* Filesystems shall be initialized to support file descriptor based device
* drivers and basic input/output functions such as printf(). Filesystems can
@@ -2048,6 +2252,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the described feature is not
* enabled.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_FILESYSTEM_ALL
@@ -2066,6 +2275,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* This filesystem requires a Block Device Cache configuration, see @ref
* CONFIGURE_APPLICATION_NEEDS_LIBBLOCK.
@@ -2086,6 +2300,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the described feature is not
* enabled.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_FILESYSTEM_FTPFS
@@ -2104,6 +2323,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* Applications will rarely need this configuration option. This configuration
* option is intended for test programs. You do not need to define this
@@ -2126,6 +2350,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the described feature is not
* enabled.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_FILESYSTEM_JFFS2
@@ -2143,6 +2372,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the described feature is not
* enabled.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_FILESYSTEM_NFS
@@ -2161,6 +2395,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* This filesystem requires a Block Device Cache configuration, see @ref
* CONFIGURE_APPLICATION_NEEDS_LIBBLOCK.
@@ -2181,6 +2420,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the described feature is not
* enabled.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_FILESYSTEM_TFTPFS
@@ -2197,6 +2441,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* changing the mode of files.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_CHMOD
@@ -2213,6 +2462,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* changing the ownership of files.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_CHOWN
@@ -2229,6 +2483,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports hard
* links.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_LINK
@@ -2245,6 +2504,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* making files.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_MKNOD
@@ -2261,6 +2525,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* making device files.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_MKNOD_DEVICE
@@ -2277,6 +2546,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* making regular files.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_MKNOD_FILE
@@ -2293,6 +2567,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* mounting other filesystems.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_MOUNT
@@ -2310,6 +2589,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* reading directories.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_READDIR
@@ -2326,6 +2610,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* reading symbolic links.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_READLINK
@@ -2342,6 +2631,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* renaming files.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_RENAME
@@ -2358,6 +2652,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* removing files.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_RMNOD
@@ -2374,6 +2673,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* creating symbolic links.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_SYMLINK
@@ -2390,6 +2694,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* unmounting other filesystems.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_UNMOUNT
@@ -2406,6 +2715,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS supports
* changing file times.
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_DISABLE_UTIME
@@ -2422,6 +2736,11 @@
* @par Default Configuration
* If this configuration option is undefined, then the root IMFS does not
* support making FIFOs (no support for mkfifo()).
+ *
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
*/
#define CONFIGURE_IMFS_ENABLE_MKFIFO
@@ -2439,8 +2758,16 @@
* The default value is 128.
*
* @par Constraints
- * The value of the configuration option shall be equal to 16, 32, 64, 128,
- * 256, or 512.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be equal to 16, 32, 64, 128,
+ * 256, or 512.
+ * @endparblock
*
* @par Notes
* @parblock
@@ -2489,6 +2816,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* In case this configuration option is defined, then the following
@@ -2542,6 +2874,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* In case this configuration option is defined, then the following
@@ -2596,6 +2933,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* Dirtying memory can add significantly to system initialization time. It may
@@ -2656,6 +2998,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is mandatory for the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall define the configuration option.
+ *
* @par Notes
* You can enable this option to reduce the size of the :term:`TCB`. Use this
* option with care, since it can lead to race conditions and undefined system
@@ -2683,6 +3030,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -2718,6 +3069,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -2847,6 +3202,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* The dirtying performed by this option is carried out for each successful
* memory allocation from the C Program Heap in contrast to @ref
@@ -2872,6 +3232,11 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * A value of zero for the configuration option is mandatory for the
+ * pre-qualified feature set of RTEMS. Applications which are restricted to
+ * only use interfaces of the pre-qualified feature set of RTEMS shall define
+ * the configuration option to zero.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -2995,6 +3360,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3037,6 +3406,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3076,6 +3449,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3256,6 +3633,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* The stack checker performs run-time stack bounds checking. This increases
@@ -3311,6 +3693,11 @@
* If this configuration option is undefined, then there will be separate
* memory pools for the RTEMS Workspace and C Program Heap.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* Having separate pools does have some advantages in the event a task blows a
@@ -3344,8 +3731,16 @@
* The default value is 8.
*
* @par Constraints
- * The value of the configuration option shall meet the constraints of all
- * object classes to which it is applied.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall meet the constraints of all
+ * object classes to which it is applied.
+ * @endparblock
*
* @par Notes
* @parblock
@@ -3372,6 +3767,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* When using unlimited objects, it is common practice to also specify @ref
@@ -3400,6 +3800,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* You may use this feature to debug system initialization issues. The
* printk() function is used to print the information.
@@ -3421,6 +3826,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* Zeroing memory can add significantly to the system initialization time. It
* is not necessary for RTEMS but is often assumed by support libraries. In
@@ -3657,6 +4067,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3690,6 +4104,11 @@
* If this configuration option is undefined, then the multiprocessing services
* are not initialized.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* This configuration option shall be undefined if the multiprocessing support
* is not enabled (e.g. RTEMS was built without the multiprocessing build
@@ -3715,6 +4134,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3750,6 +4173,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3781,6 +4208,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3815,8 +4246,16 @@
* The default value is ``&MPCI_table``.
*
* @par Constraints
- * The value of the configuration option shall be a pointer to
- * ::rtems_mpci_table.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be a pointer to
+ * ::rtems_mpci_table.
+ * @endparblock
*
* @par Notes
* @parblock
@@ -3847,6 +4286,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3901,6 +4344,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3942,6 +4389,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -3988,6 +4439,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -4034,6 +4489,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -4079,6 +4538,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -4130,6 +4593,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -4175,6 +4642,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -4228,6 +4699,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -4279,6 +4754,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be small enough so that the
* task stack space calculation carried out by ``<rtems/confdefs.h>`` does
* not overflow an integer of type <a
@@ -4320,8 +4799,16 @@
* The default value is ``POSIX_Init``.
*
* @par Constraints
- * The value of the configuration option shall be defined to a valid function
- * pointer of the type ``void *( *entry_point )( void * )``.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be defined to a valid function
+ * pointer of the type ``void *( *entry_point )( void * )``.
+ * @endparblock
*
* @par Notes
* The application shall provide the function referenced by this configuration
@@ -4346,6 +4833,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* @ref CONFIGURE_MINIMUM_TASK_STACK_SIZE.
*
@@ -4371,6 +4862,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* The application shall define at least one of the following configuration
@@ -4447,6 +4943,10 @@
* @parblock
* The following constraints apply to this configuration option:
*
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* * The value of the configuration option shall be greater than or equal to
* zero.
*
@@ -4592,6 +5092,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This scheduler configuration option is an advanced configuration option.
@@ -4620,6 +5125,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This scheduler configuration option is an advanced configuration option.
@@ -4781,6 +5291,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This scheduler configuration option is an advanced configuration option.
@@ -4815,6 +5330,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This scheduler configuration option is an advanced configuration option.
@@ -4849,6 +5369,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This scheduler configuration option is an advanced configuration option.
@@ -4877,6 +5402,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This scheduler configuration option is an advanced configuration option.
@@ -4907,6 +5437,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This scheduler configuration option is an advanced configuration option.
@@ -4999,6 +5534,11 @@
* If this configuration option is undefined, then the described feature is not
* enabled.
*
+ * @par Constraints
+ * The configuration option is not included in the pre-qualified feature set of
+ * RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
* @par Notes
* @parblock
* This scheduler configuration option is an advanced configuration option.
@@ -5166,9 +5706,17 @@
* href="https://en.cppreference.com/w/c/types/NULL">NULL</a>.
*
* @par Constraints
- * The value of the configuration option shall be defined to a valid function
- * pointer of the type ``void ( *initialize )( size_t )`` or to <a
- * href="https://en.cppreference.com/w/c/types/NULL">NULL</a>.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be defined to a valid function
+ * pointer of the type ``void ( *initialize )( size_t )`` or to <a
+ * href="https://en.cppreference.com/w/c/types/NULL">NULL</a>.
+ * @endparblock
*
* @par Notes
* @parblock
@@ -5230,11 +5778,19 @@
* The default value is a macro which supports the system heap allocator.
*
* @par Constraints
- * The value of the configuration option shall be defined to a macro which
- * accepts exactly one parameter and returns an unsigned integer. The
- * parameter will be an allocation size and the macro shall return this size
- * plus the overhead of the allocator to manage an allocation request for this
- * size.
+ * @parblock
+ * The following constraints apply to this configuration option:
+ *
+ * * The configuration option is not included in the pre-qualified feature set
+ * of RTEMS. Applications which are restricted to only use interfaces of the
+ * pre-qualified feature set of RTEMS shall not use the configuration option.
+ *
+ * * The value of the configuration option shall be defined to a macro which
+ * accepts exactly one parameter and returns an unsigned integer. The
+ * parameter will be an allocation size and the macro shall return this size
+ * plus the overhead of the allocator to manage an allocation request for
+ * this size.
+ * @endparblock
*
* @par Notes
* This configuration option may be used if a custom task stack allocator is