/*
* Network configuration -- QEMU NOT using DHCP
*
************************************************************
* EDIT THIS FILE TO REFLECT YOUR NETWORK CONFIGURATION *
* BEFORE RUNNING ANY RTEMS PROGRAMS WHICH USE THE NETWORK! *
************************************************************
*
* The dynamic probing is based upon the EPICS network
* configuration file written by:
* W. Eric Norum
* eric.norum@usask.ca
* (306) 966-5394
*
* $Id$
*/
#ifndef _RTEMS_NETWORKCONFIG_H_
#define _RTEMS_NETWORKCONFIG_H_
/* #define USE_LIBBSDPORT */
#if defined(USE_LIBBSDPORT)
#include <bsp/libbsdport_api.h>
#define CONFIGURE_MAXIMUM_TIMERS 10
#endif
/*
* For TFTP test application
*/
#if (defined (RTEMS_USE_BOOTP))
#define RTEMS_TFTP_TEST_HOST_NAME "BOOTP_HOST"
#define RTEMS_TFTP_TEST_FILE_NAME "BOOTP_FILE"
#else
#define RTEMS_TFTP_TEST_HOST_NAME "XXX.YYY.ZZZ.XYZ"
#define RTEMS_TFTP_TEST_FILE_NAME "tftptest"
#endif
/*
* For NFS test application
*
* NFS mount and a directory to ls once mounted
*/
#define RTEMS_NFS_SERVER "192.168.1.210"
#define RTEMS_NFS_SERVER_PATH "/home"
#define RTEMS_NFS_LS_PATH "/mnt/nfstest"
/*
* This file can be copied to an application source dirctory
* and modified to override the values shown below.
*
* The following CPP symbols may be passed from the Makefile:
*
* symbol default description
*
* NETWORK_TASK_PRIORITY 150 can be read by app from public
* var 'gesysNetworkTaskPriority'
* FIXED_IP_ADDR <undefined> hardcoded IP address (e.g.,
* "192.168.0.10"); disables BOOTP;
* must also define FIXED_NETMASK
* FIXED_NETMASK <undefined> IP netmask string
* (e.g. "255.255.255.0")
* LO_IF_ONLY <undefined> If defined, do NOT configure
* any ethernet driver but only the
* loopback interface.
* MULTI_NETDRIVER <undefined> ugly hack; if defined try to probe
* a variety of PCI and ISA drivers
* (i386 ONLY) use is discouraged!
* NIC_NAME <undefined> Ethernet driver name (e.g. "pcn1");
* must also define NIC_ATTACH
* NIC_ATTACH <undefined> Ethernet driver attach function
* (e.g., rtems_fxp_attach).
* If these are undefined then
* a) MULTI_NETDRIVER is used
* (if defined)
* b) RTEMS_BSP_NETWORK_DRIVER_NAME/
* RTEMS_BSP_NETWORK_DRIVER_ATTACH
* are tried
* MEMORY_CUSTOM <undefined> Allocate the defined amount of
* memory for mbufs and mbuf clusters,
* respectively. Define to a comma ','
* separated pair of two numerical
* values, e.g: 100*1024,200*1024
* MEMORY_SCARCE <undefined> Allocate few memory for mbufs
* (hint for how much memory the
* board has)
* MEMORY_HUGE <undefined> Allocate a lot of memory for mbufs
* (hint for how much memory the
* board has)
* If none of MEMORY_CUSTOM/
* MEMORY_SCARCE/MEMORY_HUGE are
* defined then a medium amount of
* memory is allocated for mbufs.
*/
#include <rtems/bspIo.h>
#include <bsp.h>
#include <rtems/rtems_bsdnet.h>
#if 0
#ifdef HAVE_CONFIG_H
#include <config.h>
#else
#include "verscheck.h"
#endif
#endif
#define MULTI_NETDRIVER
/* Assume we are on qemu unless forced to lab hardware */
#if !defined(ON_RTEMS_LAB_WINSYSTEMS)
#undef ON_QEMU
#define ON_QEMU
#endif
#if defined(ON_QEMU)
#define FIXED_IP_ADDR "10.0.2.5"
#endif
#if defined(ON_RTEMS_LAB_WINSYSTEMS)
#define FIXED_IP_ADDR "192.168.1.249"
#endif
#define FIXED_NETMASK "255.255.255.0"
#ifndef NETWORK_TASK_PRIORITY
#define NETWORK_TASK_PRIORITY 150 /* within EPICS' range */
#endif
/* make publicily available for startup scripts... */
const int gesysNetworkTaskPriority = NETWORK_TASK_PRIORITY;
#ifdef FIXED_IP_ADDR
#define RTEMS_DO_BOOTP 0
#else
#define RTEMS_DO_BOOTP rtems_bsdnet_do_bootp
#define FIXED_IP_ADDR 0
#undef FIXED_NETMASK
#define FIXED_NETMASK 0
#endif
#ifdef LO_IF_ONLY
#undef NIC_NAME
#elif !defined(NIC_NAME)
#ifdef MULTI_NETDRIVER
#if 0
#if RTEMS_VERSION_ATLEAST(4,6,99)
#define pcib_init pci_initialize
#endif
#endif
extern int rtems_3c509_driver_attach (struct rtems_bsdnet_ifconfig *, int);
extern int rtems_fxp_attach (struct rtems_bsdnet_ifconfig *, int);
extern int rtems_elnk_driver_attach (struct rtems_bsdnet_ifconfig *, int);
extern int rtems_dec21140_driver_attach (struct rtems_bsdnet_ifconfig *, int);
/* these don't probe and will be used even if there's no device :-( */
extern int rtems_ne_driver_attach (struct rtems_bsdnet_ifconfig *, int);
extern int rtems_wd_driver_attach (struct rtems_bsdnet_ifconfig *, int);
static struct rtems_bsdnet_ifconfig isa_netdriver_config[] = {
{
"ep0", rtems_3c509_driver_attach, isa_netdriver_config + 1,
},
{
"ne1", rtems_ne_driver_attach, 0, irno: 9 /* qemu cannot configure irq-no :-(; has it hardwired to 9 */
},
};
static struct rtems_bsdnet_ifconfig pci_netdriver_config[]={
{
"dc1", rtems_dec21140_driver_attach, pci_netdriver_config+1,
},
#if !defined(USE_LIBBSDPORT)
{
"fxp1", rtems_fxp_attach, pci_netdriver_config+2,
},
#else
{
"", libbsdport_netdriver_attach, pci_netdriver_config+2,
},
#endif
{
"elnk1", rtems_elnk_driver_attach, isa_netdriver_config,
},
};
static int pci_check(struct rtems_bsdnet_ifconfig *ocfg, int attaching)
{
struct rtems_bsdnet_ifconfig *cfg;
int if_index_pre;
extern int if_index;
if ( attaching ) {
cfg = pci_initialize() ?
isa_netdriver_config : pci_netdriver_config;
}
while ( cfg ) {
printk("Probing '%s'", cfg->name);
/* unfortunately, the return value is unreliable - some drivers report
* success even if they fail.
* Check if they chained an interface (ifnet) structure instead
*/
if_index_pre = if_index;
cfg->attach(cfg, attaching);
if ( if_index > if_index_pre ) {
/* assume success */
printk(" .. seemed to work\n");
ocfg->name = cfg->name;
ocfg->attach = cfg->attach;
return 0;
}
printk(" .. failed\n");
cfg = cfg->next;
}
return -1;
}
#define NIC_NAME "dummy"
#define NIC_ATTACH pci_check
#else
#if defined(RTEMS_BSP_NETWORK_DRIVER_NAME) /* Use NIC provided by BSP */
# define NIC_NAME RTEMS_BSP_NETWORK_DRIVER_NAME
# define NIC_ATTACH RTEMS_BSP_NETWORK_DRIVER_ATTACH
#endif
#endif /* ifdef MULTI_NETDRIVER */
#endif /* ifdef LO_IF_ONLY */
#ifdef NIC_NAME
extern int NIC_ATTACH();
static struct rtems_bsdnet_ifconfig netdriver_config[1] = {{
NIC_NAME, /* name */
(int (*)(struct rtems_bsdnet_ifconfig*,int))NIC_ATTACH, /* attach function */
0, /* link to next interface */
FIXED_IP_ADDR,
FIXED_NETMASK
}};
#else
#ifndef LO_IF_ONLY
#warning "NO KNOWN NETWORK DRIVER FOR THIS BSP -- YOU MAY HAVE TO EDIT rtems_netconfig.c"
#endif
#endif
extern void rtems_bsdnet_loopattach();
static struct rtems_bsdnet_ifconfig loopback_config = {
"lo0", /* name */
(int (*)(struct rtems_bsdnet_ifconfig *, int))rtems_bsdnet_loopattach, /* attach function */
#ifdef NIC_NAME
netdriver_config, /* link to next interface */
#else
0, /* link to next interface */
#endif
"127.0.0.1", /* IP address */
"255.0.0.0", /* IP net mask */
};
struct rtems_bsdnet_config rtems_bsdnet_config = {
&loopback_config, /* Network interface */
#ifdef NIC_NAME
RTEMS_DO_BOOTP, /* Use BOOTP to get network configuration */
#else
0, /* Use BOOTP to get network configuration */
#endif
NETWORK_TASK_PRIORITY, /* Network task priority */
#if defined(MEMORY_CUSTOM)
MEMORY_CUSTOM,
#elif defined(MEMORY_SCARCE)
100*1024, /* MBUF space */
200*1024, /* MBUF cluster space */
#elif defined(MEMORY_HUGE)
2*1024*1024, /* MBUF space */
5*1024*1024, /* MBUF cluster space */
#else
180*1024, /* MBUF space */
350*1024, /* MBUF cluster space */
#endif
#if (!defined (RTEMS_USE_BOOTP)) && defined(ON_RTEMS_LAB_WINSYSTEMS)
"rtems", /* Host name */
"nodomain.com", /* Domain name */
"192.168.1.14", /* Gateway */
"192.168.1.1", /* Log host */
{"192.168.1.1" }, /* Name server(s) */
{"192.168.1.1" }, /* NTP server(s) */
#else
NULL, /* Host name */
NULL, /* Domain name */
NULL, /* Gateway */
NULL, /* Log host */
{ NULL }, /* Name server(s) */
{ NULL }, /* NTP server(s) */
#endif /* !RTEMS_USE_BOOTP */
0, /* efficiency */
0, /* udp TX buffer */
0, /* udp RX buffer */
0, /* tcp TX buffer */
0, /* tcp RX buffer */
};
#endif /* _RTEMS_NETWORKCONFIG_H_ */