1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
|
#include "rtemscompat_defs.h"
#include "../porting/if_xxx_rtems.c"
#include <bsp/early_enet_link_status.h>
#include <bsp/if_em_pub.h>
/* Provide a routine to check link status early,
* i.e., before the network is really running.
* In case someone wants to decide whether to use/configure
* this interface at all :-)
*
* NOTE: this routine tries to enable autonegotiation!
*
* unit: unit number starting with 1 (usual BSDNET convention)
*
* RETURNS: Phy status register contents (1<<2 means link up).
* or -1 on error.
*/
/*
* Authorship
* ----------
* This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was
* created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* The 'beatnik' BSP was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
static int
em_early_init(int idx)
{
if ( idx < 0 || idx >= NETDRIVER_SLOTS )
return -1;
return em_hw_early_init(&the_em_devs[idx]);
}
static int
em_early_read_phy(int idx, unsigned reg)
{
unsigned short data;
if ( idx < 0 || idx >= NETDRIVER_SLOTS )
return -1;
/* Bizarre - I always have to read PHY_STATUS twice until a good link
* status is read
*/
if ( em_read_phy_reg(&the_em_devs[idx].d_softc.hw, reg, &data) )
return -1;
if ( PHY_STATUS == reg ) {
/* read again */
if ( em_read_phy_reg(&the_em_devs[idx].d_softc.hw, PHY_STATUS, &data) )
return -1;
}
return data;
}
static int
em_early_write_phy(int idx, unsigned reg, unsigned val)
{
if ( idx < 0 || idx >= NETDRIVER_SLOTS )
return -1;
return em_write_phy_reg(&the_em_devs[idx].d_softc.hw, reg, val);
}
rtems_bsdnet_early_link_check_ops
rtems_em_early_link_check_ops = {
init: em_early_init,
read_phy: em_early_read_phy,
write_phy: em_early_write_phy,
name: NETDRIVER,
num_slots: NETDRIVER_SLOTS
};
|