1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
/*
* MC9328MXL clock specific using the System Timer
*/
/*
* Copyright (c) 2004 by Cogent Computer Systems
* Written by Jay Monkman <jtm@lopingdog.com>
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#include <rtems.h>
#include <bsp.h>
#include <bsp/irq.h>
#include <mc9328mxl.h>
#include <rtems/bspIo.h> /* for printk */
/* this is defined in ../../../shared/dev/clock/clockimpl.h */
void Clock_isr(rtems_irq_hdl_param arg);
static void clock_isr_on(const rtems_irq_connect_data *unused);
static void clock_isr_off(const rtems_irq_connect_data *unused);
static int clock_isr_is_on(const rtems_irq_connect_data *irq);
/* Replace the first value with the clock's interrupt name. */
rtems_irq_connect_data clock_isr_data = {
.name = BSP_INT_TIMER1,
.hdl = Clock_isr,
.handle = (void *)BSP_INT_TIMER1,
.on = clock_isr_on,
.off = clock_isr_off,
.isOn = clock_isr_is_on,
};
/**
* When we get the clock interrupt
* - clear the interrupt bit?
* - restart the timer?
*/
#define Clock_driver_support_at_tick(arg) \
do { \
uint32_t reg; \
\
reg = MC9328MXL_TMR1_TSTAT; \
(void) reg; /* avoid set but not used warning */ \
MC9328MXL_TMR1_TSTAT = 0; \
} while(0)
/**
* Installs the clock ISR. You shouldn't need to change this.
*/
#define Clock_driver_support_install_isr( _new ) \
BSP_install_rtems_irq_handler(&clock_isr_data)
/**
* Initialize the hardware for the clock
* - Set the frequency
* - enable it
* - clear any pending interrupts
*
* Since you may want the clock always running, you can
* enable interrupts here. If you do so, the clock_isr_on(),
* clock_isr_off(), and clock_isr_is_on() functions can be
* NOPs.
*/
#define Clock_driver_support_initialize_hardware() \
do { \
int freq; \
int cnt; \
freq = get_perclk1_freq(); \
printk("perclk1 freq is %d\n", freq); \
cnt = ((long long)freq * rtems_configuration_get_microseconds_per_tick() + 500000) / 1000000;\
printk("cnt freq is %d\n", cnt); \
MC9328MXL_TMR1_TCMP = cnt; \
/* use PERCLK1 as input, enable timer */ \
MC9328MXL_TMR1_TCTL = (MC9328MXL_TMR_TCTL_CLKSRC_PCLK1 | \
MC9328MXL_TMR_TCTL_TEN | \
MC9328MXL_TMR_TCTL_IRQEN); \
/* set prescaler to 1 (register value + 1) */ \
MC9328MXL_TMR1_TPRER = 0; \
} while (0)
/**
* Enables clock interrupt.
*
* If the interrupt is always on, this can be a NOP.
*/
static void clock_isr_on(const rtems_irq_connect_data *unused)
{
MC9328MXL_TMR1_TCTL |= MC9328MXL_TMR_TCTL_IRQEN;
MC9328MXL_AITC_INTENNUM = MC9328MXL_INT_TIMER1;
}
/**
* Disables clock interrupts
*
* If the interrupt is always on, this can be a NOP.
*/
static void clock_isr_off(const rtems_irq_connect_data *unused)
{
MC9328MXL_TMR1_TCTL &= ~MC9328MXL_TMR_TCTL_IRQEN;
MC9328MXL_AITC_INTDISNUM = MC9328MXL_INT_TIMER1;
}
/**
* Tests to see if clock interrupt is enabled, and returns 1 if so.
* If interrupt is not enabled, returns 0.
*
* If the interrupt is always on, this always returns 1.
*/
static int clock_isr_is_on(const rtems_irq_connect_data *irq)
{
return MC9328MXL_TMR1_TCTL & MC9328MXL_TMR_TCTL_IRQEN;
}
#define CLOCK_DRIVER_USE_DUMMY_TIMECOUNTER
/* Make sure to include this, and only at the end of the file */
#include "../../../shared/dev/clock/clockimpl.h"
|