/**************************************************************************
*
* Copyright (c) 2013 Alcatel-Lucent
*
* Alcatel Lucent licenses this file to You under the Apache License,
* Version 2.0 (the "License"); you may not use this file except in
* compliance with the License. A copy of the License is contained the
* file LICENSE at the top level of this repository.
* You may also obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
**************************************************************************
*
* password:
*
* Code that supports the use of a password in the monitor.
*
* Original author: Ed Sutter (ed.sutter@alcatel-lucent.com)
*
*/
#include "config.h"
#include "stddefs.h"
#include "genlib.h"
#include "ether.h"
#include "tfs.h"
#include "tfsprivate.h"
#if INCLUDE_USRLVL
extern char *crypt(char *,char *,char *);
/* PASSWORD_FILE:
* The name of the file that is used to store passwords.
*/
#ifndef PASSWORD_FILE
#define PASSWORD_FILE ".monpswd"
#endif
#define SALT0 'T'
#define SALT1 'J'
int
passwordFileExists(void)
{
if (tfsstat(PASSWORD_FILE))
return(1);
return(0);
}
/* backdoor():
* A mechanism that allows a password to be generated based on the
* MAC address of the board...
*
* Return 1 if the password matches the return of crypt(KEY,SALT).
* Where:
* KEY is an 8-character string created from the MAC address
* stored in the ETHERADD environment variable;
* SALT is a 2-character string made up of the first and last
* character of the ETHERADD env var;
*/
int
backdoor(char *password)
{
int i;
char *etherstr, salt[3], encryption[32];
unsigned char etherbin[9];
etherstr = getenv("ETHERADD");
if (!etherstr) /* just in case... */
etherstr = "00:00:00:00:00:00";
/* 2 salt characters are the first and last characters of etherstr: */
salt[0] = etherstr[0];
salt[1] = etherstr[strlen(etherstr)-1];
salt[2] = 0;
EtherToBin(etherstr,etherbin);
etherbin[6] = 'A';
etherbin[7] = 'a';
etherbin[8] = 0;
for(i=0;i<6;i++) {
while (etherbin[i] > 0x7e) {
etherbin[i] -= 0x20;
etherbin[6]++;
}
while (etherbin[i] < 0x20) {
etherbin[i] += 0x8;
etherbin[7]++;
}
}
crypt((char *)etherbin,salt,encryption);
/* Note that the first two characters of the return from crypt() */
/* are not used in the comparison... */
if (!strcmp(password,encryption+2))
return(1);
else
return(0);
}
/* validPassword():
* Called with a password and user level. There are a few different ways
* in which this can pass...
* 1. If there is no PASSWORD_FILE in TFS, return true.
* 2. If the password matches the backdoor entry, return true.
* 3. If the password matches appropriate entry in the password file,
* return true.
*/
int
validPassword(char *password, int ulvl)
{
char line[80];
int (*fptr)(void);
int tfd, lno, pass, lsize;
/* If there is a password file, then use it.
* If there is no password file, then call extValidPassword() to
* support systems that store the password some other way.
* The extValidPassword() function should return 0 if password check
* failed, 1 if the check succeeded and -1 if there is no external
* password storage hardware.
* Finally, if there is no password file, AND there is no external
* password storage hardware, then just return 1 to
* indicate that ANY password is a valid password. In other words...
* the password protection stuff is only enabled if you have a password
* stored away somewhere.
*/
if (!passwordFileExists()) {
static int warning;
switch(extValidPassword(password,ulvl)) {
case 0: /* Password check failed. */
return(0);
case 1: /* Password check passed. */
return(1);
default: /* No external password check in use. */
break;
}
if (!warning) {
printf("WARNING: no %s file, security inactive.\n",PASSWORD_FILE);
warning = 1;
}
return(1);
}
/* First check for backdoor entry... */
if (backdoor(password))
return(1);
/* Incoming user level must be in valid range... */
if ((ulvl < MINUSRLEVEL) || (ulvl > MAXUSRLEVEL))
return(0);
/* If user level is MINUSRLEVEL, there is no need for a password. */
if (ulvl == MINUSRLEVEL)
return(1);
/* Check for a match in the password file...
* The PASSWORD_FILE dedicates one line for each user level.
* Line1 is password for user level 1.
* Line2 is password for user level 2.
* Line3 is password for user level 3.
* User level 0 doesn't require a password.
*/
/* Force the getUsrLvl() function to return MAX: */
fptr = (int(*)(void))setTmpMaxUsrLvl();
tfd = tfsopen(PASSWORD_FILE,TFS_RDONLY,0);
if (tfd < 0) {
/* Restore the original getUsrLvl() functionality: */
clrTmpMaxUsrLvl(fptr);
printf("%s\n",(char *)tfsctrl(TFS_ERRMSG,tfd,0));
return(0);
}
lno = 1;
pass = 0;
while((lsize=tfsgetline(tfd,line,sizeof(line)))) {
char encryption[32], salt[3];
if (lno != ulvl) {
lno++;
continue;
}
line[lsize-1] = 0; /* Remove the newline */
salt[0] = SALT0;
salt[1] = SALT1;
salt[2] = 0;
crypt(password,salt,encryption);
if (!strncmp(line,encryption+2,strlen(line)-2))
pass = 1;
break;
}
tfsclose(tfd,0);
/* Restore the original getUsrLvl() functionality: */
clrTmpMaxUsrLvl(fptr);
return(pass);
}
/* newPasswordFile():
* Prompt the user for three passwords. One for each user level.
* Then, after retrieving them, make sure the user wants to update
* the password file; if yes, do it; else abort.
*/
int
newPasswordFile(void)
{
int err, i;
char pswd1[16], pswd2[16];
char salt[3], *epwp, buf[32], epswd[34*3], flags[8];
/* For each of the three levels (1,2&3), get the password, encrypt it
* and concatenate newline for storate into the password file.
*/
epwp = epswd;
for(i=1;i<4;i++) {
while(1) {
printf("Lvl%d ",i);
getpass("passwd: ",pswd1,sizeof(pswd1)-1,0);
if (strlen(pswd1) < 8) {
printf("password must be >= 8 chars.\n");
continue;
}
getpass("verify: ",pswd2,sizeof(pswd2)-1,0);
if (strcmp(pswd1,pswd2))
printf("Entries do not match, try again...\n");
else
break;
}
salt[0] = SALT0;
salt[1] = SALT1;
salt[2] = 0;
crypt(pswd1,salt,buf);
sprintf(epwp,"%s\n",&buf[2]);
epwp += strlen(epwp);
}
if (!askuser("Are you sure?"))
return(0);
err = tfsunlink(PASSWORD_FILE);
if ((err != TFS_OKAY) && (err != TFSERR_NOFILE)) {
printf("%s\n",(char *)tfsctrl(TFS_ERRMSG,err,0));
return(-1);
}
sprintf(flags,"u%d",MAXUSRLEVEL);
err = tfsadd(PASSWORD_FILE,0, flags, (uchar *)epswd, strlen(epswd));
if (err != TFS_OKAY) {
printf("%s\n",(char *)tfsctrl(TFS_ERRMSG,err,0));
return(-1);
}
return(0);
}
#ifndef EXT_VALID_PASSWORD
/* extValidPassword():
* See validPassword() above for notes on the purpose of this function.
*
* This is the default stub, if a real extValidPassword() function is
* provided by the port, then EXT_VALID_PASSWORD should be defined in
* that port's config.h file.
*/
int
extValidPassword(char *password, int ulvl)
{
return(-1);
}
#endif /* EXT_VALID_PASSWORD */
#endif /* INCLUDE_USRLVL */
