blob: 2592fdfd6c4c700a65775e63916266b6a54c6cd5 (
plain) (
tree)
|
|
/*
* Monitor configuration file
*
* General notice:
* This code is part of a boot-monitor package developed as a generic base
* platform for embedded system designs. As such, it is likely to be
* distributed to various projects beyond the control of the original
* author. Please notify the author of any enhancements made or bugs found
* so that all may benefit from the changes. In addition, notification back
* to the author will allow the new user to pick up changes that may have
* been made by other users after this version of the code was distributed.
*
* Author: Ed Sutter
* email: esutter@lucent.com
* phone: 908-582-2351
*
*
* Adapted by Jarielle Catbagan for the Beaglebone Black
* email: jcatbagan93@gmail.com
*/
#include "am335x.h"
/*
* The target_putchar() function also drops the character at the
* LCD...
*/
//#define MORE_PUTCHAR lcd_putchar
//#define CONSOLE_UART_BASE (OMAP35XX_L4_IO_BASE+0x6C000)
#define CONSOLE_UART_BASE UART0_BASE
#define SIO_STEP 4
#define IEN_DEFAULT 0x40
#define MCTL_DEFAULT 0x01
#define TIMER_TICKS_PER_MSEC 545000
/* DEFAULT_ETHERADD & DEFAULT_IPADD:
* Refer to notes in ethernet.c function EthernetStartup() for details
* regarding the use of these definitions.
* DEFAULT_IPADD could be set to "DHCP" or "BOOTP" as well.
*/
#define DEFAULT_ETHERADD "00:30:23:40:00:" // Cogent Block
#define DEFAULT_IPADD "192.168.254.110"
#define CPU_LE
// Establish a user defined function to be called when uMon
// prints out the startup banner...
// If this is defined, then the output similar to the following will
// be printed just above the uMon header...
// Silicon ID: 1.0
// CPU Rev: 2, Variant: 1
// CM Rev: 1.0, PRM Rev: 1.0
// #define USR_HEADER_FUNC show_revision
/* Defining DONT_CENTER_MONHEADER eliminates the automatic centering
* of the monitor's startup banner...
*/
#define DONT_CENTER_MONHEADER
/* XBUFCNT & RBUFCNT:
* Number of transmit and receive buffers allocated to ethernet.
* The total of XBUFCNT+RBUFCNT should not exceed MAXEBDS
*/
#define XBUFCNT 8
#define RBUFCNT 8
#define XBUFSIZE 2048
#define RBUFSIZE 2048
/* LOOPS_PER_SECOND:
* Approximately the size of a loop that will cause a 1-second delay.
* This can be guestimated or modified with the sleep -c command at the
* monitor command line.
*/
#define LOOPS_PER_SECOND 15000
#define INCLUDE_NANDCMD 0
#if INCLUDE_NANDCMD
/* Needed for NAND to work with TFSRAM:
*/
#define NAND_TFS_BASE 0x10000 // base of TFS in NAND
#define FLASHRAM_BASE 0x80300000
#define FLASHRAM_END 0x8037ffff
#define FLASHRAM_SECTORSIZE 0x00010000
#define FLASHRAM_SPARESIZE FLASHRAM_SECTORSIZE
#define FLASHRAM_BANKNUM 1
#define FLASHRAM_SECTORCOUNT 8
#endif
/* Flash bank configuration:
*/
#ifdef FLASHRAM_BASE
#define FLASHBANKS 2
#else
#define FLASHBANKS 1
#endif
#define SINGLE_FLASH_DEVICE 1
#define FLASH_COPY_TO_RAM 1
#define FLASH_BANK0_BASE_ADDR 0x08000000
#define FLASH_PROTECT_RANGE "0-2"
#define FLASH_BANK0_WIDTH 2
#define FLASH_LARGEST_SECTOR 0x20000
#define FLASH_LOOP_TIMEOUT 10000000
#define BUFFERED_WRITE
/* TFS definitions:
* TFSSTART: Base address in FLASH at which TFS starts.
* TFSEND: End address of TFS in FLASH.
* TFSSPARE: Location of sector that is used as the spare sector
* by TFS for defragmentation.
* TFSSPARESIZE: Size of the spare sector used by TFS for defragmentation.
* TFSSECTORCOUNT: Number of eraseable sectors that TFS covers, not including
* the TFSSPARE sector.
*/
#define TFSSPARESIZE FLASH_LARGEST_SECTOR
#define TFS_DEVTOT 1
#define TFSSTART (FLASH_BANK0_BASE_ADDR+0x060000)
//#define TFSEND (FLASH_BANK0_BASE_ADDR+0x007dffff) // 8MB Flash
#define TFSEND (FLASH_BANK0_BASE_ADDR+0x00edffff) // 16MB Flash
//#define TFSEND (FLASH_BANK0_BASE_ADDR+0x03dfffff) // 64MB Flash
#define TFSSPARE (TFSEND+1)
#define TFSSECTORCOUNT ((TFSSPARE-TFSSTART)/0x20000)
#define TFS_EBIN_ELFMSBIN 1
#define TFS_VERBOSE_STARTUP 1
#define TFS_ALTDEVTBL_BASE &alt_tfsdevtbl_base
/* Specify CPU/PLATFORM type and name so that common code can be used
* for a similar cpu, on different platforms.
* The 'TYPE' definition is used for ifdefs in the code and the 'NAME'
* is used for printfs in the code.
*/
#define CPU_TYPE AM3358
#define CPU_NAME "TI AM3358 Cortex-A8"
#define PLATFORM_TYPE BEAGLEBONEBLACK
#define PLATFORM_NAME "Beaglebone Black"
/* Specify the size of the memory block (in monitor space) that is to be
* allocated to malloc in the monitor. Note that this size can be dynamically
* increased using the heap extension option in the heap command.
*/
#define ALLOCSIZE 1024 // (64*1024)
#define MONSTACKSIZE (16*1024)
/* Specify inclusion of subsystems within the monitor here.
* Refer to comments in common/monitor/inc_check.h for details on
* each of these macros.
*/
#define INCLUDE_MEMTRACE 0
#define INCLUDE_MEMCMDS 1
#define INCLUDE_EDIT 0
#define INCLUDE_DISASSEMBLER 0
#define INCLUDE_UNZIP 0
#define INCLUDE_ETHERNET 0
#define INCLUDE_ICMP 0
#define INCLUDE_TFTP 0
#define INCLUDE_DHCPBOOT 0
#define INCLUDE_TFS 0
#define INCLUDE_TFSCLI 0
#define INCLUDE_TFSAPI 0
#define INCLUDE_TFSSCRIPT 0
#define INCLUDE_TFSSYMTBL 0
#define INCLUDE_XMODEM 1
#define INCLUDE_LINEEDIT 0
#define INCLUDE_EE 0
#define INCLUDE_FLASH 0
#define INCLUDE_STRACE 0
#define INCLUDE_CAST 0
#define INCLUDE_STRUCT 0
#define INCLUDE_REDIRECT 0
#define INCLUDE_QUICKMEMCPY 0
#define INCLUDE_PROFILER 0
#define INCLUDE_BBC 0
#define INCLUDE_STOREMAC 0
#define INCLUDE_SHELLVARS 0
#define INCLUDE_MALLOC 0
#define INCLUDE_PORTCMD 0
#define INCLUDE_SYSLOG 0
#define INCLUDE_HWTMR 0
#define INCLUDE_VERBOSEHELP 0
#define INCLUDE_GDB 0
#define INCLUDE_USRLVL 0
#define INCLUDE_JFFS2 0
#define INCLUDE_JFFS2ZLIB 0
#define INCLUDE_FBI 0
#define INCLUDE_TSI 0
#define INCLUDE_SD 1
#define INCLUDE_DNS 0
#define INCLUDE_BLINKLED 1
#define TARGET_BLINKLED target_blinkled
/* Inclusion of this next file will make sure that all of the above
* inclusions are legal; and warn/adjust where necessary.
*/
#include "inc_check.h"
|
